Port Forwading questions.

Hi guys. Im trying to host N4 from behind a firewall/router which happens to be an Alcatel speed touch pro. I need to forward udp port range 32766-32809 I'm messing around in the modem via telnet but can't work out the right commands to achieve this. Any ideas? Thanks

[email hidden] (Guy Leach) wrote in <vO298.11987$[email hidden]>:

Quoted text (11 lines)

>Hi guys. > >Im trying to host N4 from behind a firewall/router which happens to >be an Alcatel speed touch pro. > >I need to forward udp port range 32766-32809 > >I'm messing around in the modem via telnet but can't work out the >right commands to achieve this. > >Any ideas?

I've been trying with no sucess to host GPL from behind a NAT router(DLink-704) The only solution I've found is to use the DMZ function which unfortunately negates the firewall. Don Scurlock Vancouver,B.C. GPLRank -16.50 MonsterRank 74.93 Come see how you rank, at the GPLRank site http://newgplrank.schuerkamp.de/

"Don Scurlock" <[email hidden]> wrote in message news:[email hidden]...

Quoted text (14 lines)

> [email hidden] (Guy Leach) wrote in > <vO298.11987$[email hidden]>: > > >Hi guys. > > > >Im trying to host N4 from behind a firewall/router which happens to > >be an Alcatel speed touch pro. > > > >I need to forward udp port range 32766-32809 > > > >I'm messing around in the modem via telnet but can't work out the > >right commands to achieve this. > > > >Any ideas?

nat create protocol=udp inside_addr=x.x.x.x:32766 outside_addr=0:32766 etc up to 32809 nat save Replace x.x.x.x with the internal ip address of your server, typically it will be something like 10.0.0.150 The outside addr=0 is not a typo, the modem replaces the zero with the address you get from your isp at connect time. Bart Westra

Thanks Bart I'll give that a go. Cheers "Bart Westra" <[email hidden]> wrote in message news:a4436p$19r$[email hidden]...

Quoted text (30 lines)

> > "Don Scurlock" <[email hidden]> wrote in message > news:[email hidden]... > > [email hidden] (Guy Leach) wrote in > > <vO298.11987$[email hidden]>: > > > > >Hi guys. > > > > > >Im trying to host N4 from behind a firewall/router which happens to > > >be an Alcatel speed touch pro. > > > > > >I need to forward udp port range 32766-32809 > > > > > >I'm messing around in the modem via telnet but can't work out the > > >right commands to achieve this. > > > > > >Any ideas? > > nat create protocol=udp inside_addr=x.x.x.x:32766 outside_addr=0:32766 > etc up to 32809 > nat save > > Replace x.x.x.x with the internal ip address of your server, typically it > will be something like 10.0.0.150 > The outside addr=0 is not a typo, the modem replaces the zero with the > address you get from your isp at connect time. > > Bart Westra > >