GPL - Best way to slow down AI-Performance

Hi, I want to slow down the AI-drivers in GPL. I tried to reduce the value quickness in GPLSeason. But after doing that, i recognized, that the AI-driver make more errors, they they were going into the bend too fast for to much time. I want to slow down the AI, because i want to drive in Pro and Grand Prix Mode, but i still want to have a slight chance to win a race or two.

I use AI Tweaker and have not noticed the AI make any more mistakes than normal. I don't know where I found the program, but I'm sure it's still out there. "Thomas Gatschnegg" <[email hidden]> wrote in message news:98dbdf$qco$[email hidden]... > Hi, > I want to slow down the AI-drivers in GPL. I tried to reduce the value > quickness in GPLSeason. But after doing that, i recognized, that the > AI-driver make more errors, they they were going into the bend too fastfor

Quoted text (7 lines)

> to much time. > I want to slow down the AI, because i want to drive in Pro and Grand Prix > Mode, but i still want to have a slight chance to win a race or two. > > > >

"Thomas Gatschnegg" <[email hidden]> kirjoitti viestiss� news:98dbdf$qco$[email hidden]... > Hi, > I want to slow down the AI-drivers in GPL. I tried to reduce the value-------snip--------------- Someone send this to me, when i asked the same question. ADJUSTING THE SPEED OF THE AI CARS If you find that the ai cars are too fast or too slow you can make small changes to the track.ini file. 1. Back-up your originals files 2. look for this line in the track.ini file:- dlong_speed_adj_coeff = 1.0240 3. make small changes to the value ie: change 1.0240 to 1.0440 to make the cars go faster or change 1.0240 to 1.0040 to make the cars go slower The above is just an example value you can change the value by whatever you want. This really is a matter of trial and error changing this value to get the speed you require. - Samu

I use AI Tweaker and GPLSA by Gerge Smiley: http://home.swbell.net/gmsmiley/ Jari Jokinen Samu wrote in message <98dksv$bft$[email hidden]>...

Quoted text (28 lines)

> >"Thomas Gatschnegg" <[email hidden]> kirjoitti viestiss� >news:98dbdf$qco$[email hidden]... >> Hi, >> I want to slow down the AI-drivers in GPL. I tried to reduce the value >-------snip--------------- > >Someone send this to me, when i asked the same question. > >ADJUSTING THE SPEED OF THE AI CARS >If you find that the ai cars are too fast or too slow you can make small >changes to the track.ini file. >1. Back-up your originals files >2. look for this line in the track.ini file:- dlong_speed_adj_coeff = >1.0240 >3. make small changes to the value > ie: change 1.0240 to 1.0440 to make the cars go faster > or change 1.0240 to 1.0040 to make the cars go slower > >The above is just an example value you can change the value by whatever you >want. >This really is a matter of trial and error changing this value to get the >speed you require. > >- Samu > > >

In article <98dksv$bft$[email hidden]>, Samu <[email hidden]> writes

Quoted text (19 lines)

> >"Thomas Gatschnegg" <[email hidden]> kirjoitti viestiss� >news:98dbdf$qco$[email hidden]... >> Hi, >> I want to slow down the AI-drivers in GPL. I tried to reduce the value >-------snip--------------- > >Someone send this to me, when i asked the same question. > >ADJUSTING THE SPEED OF THE AI CARS >If you find that the ai cars are too fast or too slow you can make small >changes to the track.ini file. >1. Back-up your originals files >2. look for this line in the track.ini file:- dlong_speed_adj_coeff = >1.0240 >3. make small changes to the value > ie: change 1.0240 to 1.0440 to make the cars go faster > or change 1.0240 to 1.0040 to make the cars go slower >

Or base_gearshift_hiatus = 6.000000 about 3 lines down in gpl_ai.ini. This used to be a simple way when I was first starting out with GPL. It basically changes the amount of time it takes for the AI cars to change gear. The higher the value - before the decimal point - then the longer they would take. Moderate changes to this and you probably won't notice anything. Wack it up to about 30.0000 and, if you can stay near enough to them through the corners, you can nip past them on the straights whilst they fumble around for the next gear. :) If I recall, I think I had this value as high as 80.000 when first starting out, which slowed them down by about 5 secs per minute and a half. Obviously, I don't need that now. ;-) -- Peter Ives - (AKA Ivington) Remove ALL_STRESS before replying No person's opinions can be said to be more correct than another's, because each is the sole judge of his or her own experience.

its far far easier to download aitw103, the ai tweaker prog,

Quoted text (15 lines)

> >> Hi, > >> I want to slow down the AI-drivers in GPL. I tried to reduce the value > >-------snip--------------- > > > >Someone send this to me, when i asked the same question. > > > >ADJUSTING THE SPEED OF THE AI CARS > >If you find that the ai cars are too fast or too slow you can make small > >changes to the track.ini file. > >1. Back-up your originals files > >2. look for this line in the track.ini file:- dlong_speed_adj_coeff = > >1.0240 > >3. make small changes to the value > > ie: change 1.0240 to 1.0440 to make the cars go faster > > or change 1.0240 to 1.0040 to make the cars go slower