Internet Race Finder Now Working!

It's finally working! Here are my Win2K Server IP Forwarding Settings. Some of the entries might not be needed. I basically tossed in every number I've seen thrown around. I will trim it down and find out the _exact_ number that's magic eventually, but for now I want to go do some racing I haven't been able to do in over 2 weeks! Win2K Server ICS IP Forwarding Settings for Internet Race Finder -------------------------------------------------------------------- Name Of Application - Internet Race Finder Remote Server Port Number - 4555 UDP. Incomming Response Ports - 4555, 4301, 2005, 32766-32808 UDP. I hope this helps someone. It sure took long enough for me to get it working :) Also, this means there may be trouble for LinkSYS Router owners. The above ports are all UDP. The LinkSYS router does not allow you to select between TCP and UDP, it only forwards TCP. I never realized what a serious ommision this was on LinkSYS's part until now :( -Larry

I don't know what is incorrect in your config larry but the Linksys Besfr41 "DOES" host N4 through IRF as well as connect as a client. The host machine is not in the DMZ btw. Mitch "Larry" <[email hidden]> wrote in message news:yM366.26818$[email hidden]... > It's finally working! > > Here are my Win2K Server IP Forwarding Settings. Some of the entriesmight > not be needed. I basically tossed in every number I've seen thrownaround. > I will trim it down and find out the _exact_ number that's magiceventually, > but for now I want to go do some racing I haven't been able to do in over2

Quoted text (15 lines)

> weeks! > > Win2K Server ICS IP Forwarding Settings for Internet Race Finder > -------------------------------------------------------------------- > > Name Of Application - Internet Race Finder > > Remote Server Port Number - 4555 UDP. > > Incomming Response Ports - 4555, 4301, 2005, 32766-32808 UDP. > > I hope this helps someone. It sure took long enough for me to get it > working :) > > Also, this means there may be trouble for LinkSYS Router owners. The

above > ports are all UDP. The LinkSYS router does not allow you to selectbetween

Quoted text (8 lines)

> TCP and UDP, it only forwards TCP. > > I never realized what a serious ommision this was on LinkSYS's part until > now :( > > -Larry > >

"Larry" <[email hidden]> wrote in message news:yM366.26818$[email hidden]... > The LinkSYS router does not allow you to select between > TCP and UDP, it only forwards TCP. >The 1.37 firmware release now let's you select TCP or UDP or BOTH. Just thought I would add that. Tony

You're the first I've heard about to get it working without using the DMZ setting... -Larry "Mitch Alatorre" <[email hidden]> wrote in message news:WA466.38221$[email hidden]... > I don't know what is incorrect in your config larry but the LinksysBesfr41 > "DOES" host N4 through IRF as well as connect as a client. The hostmachine

Quoted text (15 lines)

> is not in the DMZ btw. > > Mitch > > "Larry" <[email hidden]> wrote in message > news:yM366.26818$[email hidden]... > > It's finally working! > > > > Here are my Win2K Server IP Forwarding Settings. Some of the entries > might > > not be needed. I basically tossed in every number I've seen thrown > around. > > I will trim it down and find out the _exact_ number that's magic > eventually, > > but for now I want to go do some racing I haven't been able to do in

over

Quoted text (22 lines)

> 2 > > weeks! > > > > Win2K Server ICS IP Forwarding Settings for Internet Race Finder > > -------------------------------------------------------------------- > > > > Name Of Application - Internet Race Finder > > > > Remote Server Port Number - 4555 UDP. > > > > Incomming Response Ports - 4555, 4301, 2005, 32766-32808 UDP. > > > > I hope this helps someone. It sure took long enough for me to get it > > working :) > > > > Also, this means there may be trouble for LinkSYS Router owners. The > above > > ports are all UDP. The LinkSYS router does not allow you to select > between > > TCP and UDP, it only forwards TCP. > > > > I never realized what a serious ommision this was on LinkSYS's part

until

Quoted text (7 lines)

> > now :( > > > > -Larry > > > > > >

Cool! Excellent! See, bitch, and they fix it! :) -Larry "Anthony Brooks" <[email hidden]> wrote in message news:[email hidden]...

Quoted text (12 lines)

> > "Larry" <[email hidden]> wrote in message > news:yM366.26818$[email hidden]... > > The LinkSYS router does not allow you to select between > > TCP and UDP, it only forwards TCP. > > > The 1.37 firmware release now let's you select TCP or UDP or BOTH. Just > thought I would add that. > Tony > > >