GP3: Voodoo2 8 meg works!

The Voodoo2 fix works with out corupted craphics IF you install your OLDEST drivers that where shipped with your card, and then run the file.... http://stcc.bizland.com/files/Gp3_V2_Fix.zip Enjoy! Thomas

Hmm, I guess you mean the oldest drivers that work with all my other games - <sigh> Andy Thomas Heineman <[email hidden]> wrote in message news:8m4j38$1euc$[email hidden]... > The Voodoo2 fix works with out corupted craphics IF you install yourOLDEST

Quoted text (8 lines)

> drivers that where shipped with your card, and then run the file.... > > http://stcc.bizland.com/files/Gp3_V2_Fix.zip > > Enjoy! > Thomas > >

In <8m4j38$1euc$[email hidden]> "Thomas Heineman" <[email hidden]> writes: >The Voodoo2 fix works with out corupted craphics IF you install your OLDEST >drivers that where shipped with your card, and then run the file.... >http://stcc.bizland.com/files/Gp3_V2_Fix.zip Thank you Thomas! This works with my Techworks V2 8MB, P2 350MHz! And the frame rate is not so bad: PO is varying from 80 to 130%. Arto

Still doesn't work with my Techworks V2 8MB, Celeron 450MHz. How old are the drivers you used Arto? My CD says Version 2.2, the drivers are so old that GPL is a joke (the hands come and go on the wheel, the cockpit panels flash on and off...) The readme says: Glide Driver Version: 2.51 Voodoo2 D3D Driver Build Number: 4.10.01.0094-2.16 Voodoo2 Control Panel Applet: 4.10.01.0061 Result in GP3. PO still > 300& at minimum resolution, everything off, 8fps selected. Graphics corrupted (although while it was calibrating I did at least see good graphics at high resolution, even if < 0.1 fps). Ah well, the good news is that after reinstalling the latest drivers GPL only reset my PC the first time I ran it... After powering up again I took 5 seconds off my Ring time and with a PB at Mosport I dropped my handicap from 37.5 to 31.3. :-)))))) Tony Whitley Arto Wikla <[email hidden]> wrote in message news:wikla.965235590@kanasaari... > In <8m4j38$1euc$[email hidden]> "Thomas Heineman"<[email hidden]> writes: > > >The Voodoo2 fix works with out corupted craphics IF you install yourOLDEST

Quoted text (8 lines)

> >drivers that where shipped with your card, and then run the file.... > > >http://stcc.bizland.com/files/Gp3_V2_Fix.zip > > Thank you Thomas! This works with my Techworks V2 8MB, P2 350MHz! > And the frame rate is not so bad: PO is varying from 80 to 130%. > > Arto

Tony Whitley writes:

Quoted text (8 lines)

>Still doesn't work with my Techworks V2 8MB, Celeron 450MHz. How old are the >drivers you used Arto? My CD says Version 2.2, the drivers are so old that >GPL is a joke (the hands come and go on the wheel, the cockpit panels flash >on and off...) The readme says: >Glide Driver Version: 2.51 >Voodoo2 D3D Driver Build Number: 4.10.01.0094-2.16 >Voodoo2 Control Panel Applet: 4.10.01.0061

My system: WinGlide Driver Version: 2.51 Direct3D Versions: 4.10.01.0094-2.16 Advanced Properties: the only checked options are the both "Don't sync..."s. Arto