Re: N3 - Trucks at Daytona & Pocono

Here ya go Steve .... this is the stuff you need to know... jv.. N3 TRUCKS TRACK CONVERSION This will work on any N3 track. You will be working with the track text file and the track folder. COPY: default.st1 TO default.tt1 race.st1 TO race.tt1 qual.st1 TO qual.tt1 records.txt TO rectruk.txt Now the next set of files to be copied are the ".stg" files. COPY: ace.stg TO ace.ttg easy.stg TO easy.ttg qual.stg TO qual.ttg Using "Note pad" or some other text editor, open the track text file. Add four lines to the file for the trucks. Look for the "SPDWY","BLAP","RELS", and the "TIRES" lines in the text file. Insert a line after each. The SPDWY line comes first. So after the SPDWY line insert SPDWT , this will tell the trucks when to pit. Example: SPDWY 1 158 168 SPDWT 0 158 168 After the "BLAP" line insert BLAPT. Example: BLAP 15950 BLAPT 15100 The RELS line is next. Insert a RELST line. This is the strength of the cars and trucks. Example: RELS 102 RELST 101 The TIRES line is next. Insert a TIRET line. This is the tire ware of the cars and trucks. Example: TIRES 61000 4100 100000000 61000 3100 128000000 0 TIRET 58000 4100 100000000 58000 3100 128000000 0 ENJOY ! ****************************************************** DeepSouth Racing http://www.angelfire.com/sc/deepsouth [email hidden] Steve Garey <[email hidden]> wrote in message news:rLwY4.3028$%[email hidden]... > Anyone know why I get the erroe message "can't load complete track..."when

Quoted text (10 lines)

> I try to race trucks at Daytona & Pocono? > > They both work fine with cars. > > Cheers > > -- > [email hidden] > >

When I edit the track text file do I enter the same figures for the trucks that are already there for the cars. -- Dan Wallace "Juan Vizoso" <[email hidden]> wrote in message news:8guei8$irs$[email hidden]... > Here ya go Steve .... this is the stuff you need to know... jv.. > > > > > > N3 TRUCKS TRACK CONVERSION > > This will work on any N3 track. > > You will be working with the track text file and the > track folder. > > > COPY: default.st1 TO default.tt1 > race.st1 TO race.tt1 > qual.st1 TO qual.tt1 > records.txt TO rectruk.txt > > Now the next set of files to be copied are the ".stg" files. > > COPY: ace.stg TO ace.ttg > easy.stg TO easy.ttg > qual.stg TO qual.ttg > > > > > Using "Note pad" or some other text editor, open the track text file. > Add four lines to the file for the trucks. Look for the > "SPDWY","BLAP","RELS", > and the "TIRES" lines in the text file. Insert a line > after each. The SPDWY line comes first. So after the SPDWY > line insert SPDWT , this will tell the trucks when to pit. > > > Example: SPDWY 1 158 168 > SPDWT 0 158 168 > > > After the "BLAP" line insert BLAPT. > > Example: BLAP 15950 > BLAPT 15100 > > > > The RELS line is next. Insert a RELST line. This > is the strength of the cars and trucks. > > Example: RELS 102 > RELST 101 > > > The TIRES line is next. Insert a TIRET line. This > is the tire ware of the cars and trucks. > > Example: TIRES 61000 4100 100000000 61000 3100 128000000 0 > TIRET 58000 4100 100000000 58000 3100 128000000 0 > > > > > > > ENJOY ! > > > ****************************************************** > > DeepSouth Racing > http://www.angelfire.com/sc/deepsouth > [email hidden] > Steve Garey <[email hidden]> wrote in message > news:rLwY4.3028$%[email hidden]... > > Anyone know why I get the erroe message "can't load complete track..." > when > > I try to race trucks at Daytona & Pocono? > > > > They both work fine with cars. > > > > Cheers > > > > -- > > [email hidden] > > > > > > > >

Just a guess Dan........... I'm not sure but I would assume the trucks have slightly lower top speed., and less tyre wear.... ie blaps rels and tires. I would also assume that somewhere out there there will be some keen race fan who could answer this question far better than me! jv.... Daniel Wallace <[email hidden]> wrote in message news:ekkFqLay$GA.269@cpmsnbbsa06...

Quoted text (100 lines)

> When I edit the track text file do I enter the same figures for the trucks > that are already there for the cars. > > -- > Dan Wallace > "Juan Vizoso" <[email hidden]> wrote in message > news:8guei8$irs$[email hidden]... > > Here ya go Steve .... this is the stuff you need to know... jv.. > > > > > > > > > > > > N3 TRUCKS TRACK CONVERSION > > > > This will work on any N3 track. > > > > You will be working with the track text file and the > > track folder. > > > > > > COPY: default.st1 TO default.tt1 > > race.st1 TO race.tt1 > > qual.st1 TO qual.tt1 > > records.txt TO rectruk.txt > > > > Now the next set of files to be copied are the ".stg" files. > > > > COPY: ace.stg TO ace.ttg > > easy.stg TO easy.ttg > > qual.stg TO qual.ttg > > > > > > > > > > Using "Note pad" or some other text editor, open the track text file. > > Add four lines to the file for the trucks. Look for the > > "SPDWY","BLAP","RELS", > > and the "TIRES" lines in the text file. Insert a line > > after each. The SPDWY line comes first. So after the SPDWY > > line insert SPDWT , this will tell the trucks when to pit. > > > > > > Example: SPDWY 1 158 168 > > SPDWT 0 158 168 > > > > > > After the "BLAP" line insert BLAPT. > > > > Example: BLAP 15950 > > BLAPT 15100 > > > > > > > > The RELS line is next. Insert a RELST line. This > > is the strength of the cars and trucks. > > > > Example: RELS 102 > > RELST 101 > > > > > > The TIRES line is next. Insert a TIRET line. This > > is the tire ware of the cars and trucks. > > > > Example: TIRES 61000 4100 100000000 61000 3100 128000000 0 > > TIRET 58000 4100 100000000 58000 3100 128000000 0 > > > > > > > > > > > > > > ENJOY ! > > > > > > ****************************************************** > > > > DeepSouth Racing > > http://www.angelfire.com/sc/deepsouth > > [email hidden] > > Steve Garey <[email hidden]> wrote in message > > news:rLwY4.3028$%[email hidden]... > > > Anyone know why I get the erroe message "can't load complete track..." > > when > > > I try to race trucks at Daytona & Pocono? > > > > > > They both work fine with cars. > > > > > > Cheers > > > > > > -- > > > [email hidden] > > > > > > > > > > > > > > > >

Truck have their own set of setup files, with the extension .ttg, without those files the trucks can't race at a specified track. The car setup files have the extension .stg -- Dan Wallace

Anyone know why I get the erroe message "can't load complete track..." when I try to race trucks at Daytona & Pocono? They both work fine with cars. Cheers -- [email hidden]

ttg's have nothing to do with it..... gotta have a default.tt1 Daniel Wallace <[email hidden]> wrote in message news:upWdDYZy$GA.269@cpmsnbbsa06... > Truck have their own set of setup files, with the extension .ttg, without > those files the trucks can't race at a specified track. The car setupfiles > have the extension .stg > > -- > Dan Wallace > >