Race Sim Central
Rec.Autos.Simulators Archive

GPL on a CYRIX

11 posts by 9 people · 04 Oct 1998 - 09 Oct 1998

rob 04 Oct 1998#424284
>They and half the rest of the world... Have you found good support for >Cyrix chips from anyone? They don't require any support. I don't have a cyrix processor now, but I did have a 6x86MX processor. I never found any application in Linux or Windows that it wouldn't run. The older Cyrix chips that don't support all the needed instructions for gpl probably aren't fast enough to run it anyway. I replaced my Cyrix PR200+ 6x86MX processor with an AMD k6 233 for better floating point performance and saw only a small increase in performance. rob.
Doug Border 06 Oct 1998#424965
I don't check this newsgroup on a daily basis so this may have been beat to death. Is it really true that GPL won't work with a CYRIX processor?? I can't believe they would do this. -- ========================= Douglas G. Borders 1-1998 868-6312(Page) =========================
Eric Busch 06 Oct 1998#424966
Quoting from the readme: "GPL uses a Pentium instruction which is not supported by the 6x86, and as such GPL will not run on this CPU. It will run on later Cyrix chips such as the MX and MII, the AMD K5 and K6, in addition to all genuine Intel Pentium chips." - Eric
Pat Dotson 06 Oct 1998#424967
> I don't check this newsgroup on a daily basis so this may have been beat > to death. Is it really true that GPL won't work with a CYRIX > processor?? I can't believe they would do this. Can't confirm it myself, Doug, but the readme.txt file in GPL says that certain commands are used that are not supported by the Cyrix 6x86, and GPL will not run on that cpu. -- Pat Dotson IMPACT Motorsports http://www.impactmotorsports.com/pd.html
They and half the rest of the world... Have you found good support for Cyrix chips from anyone?
Quoted text (11 lines)>I don't check this newsgroup on a daily basis so this may have been beat >to death. Is it really true that GPL won't work with a CYRIX >processor?? I can't believe they would do this. >-- >========================= >Douglas G. Borders >1-1998 868-6312(Page) >=========================
Sorry, I was referring only to the older Cyrix compatibility-nightmare chips. Marc.
Quoted text (13 lines)>>They and half the rest of the world... Have you found good support for >>Cyrix chips from anyone? >They don't require any support. >I don't have a cyrix processor now, but I did have a 6x86MX processor. >I never found any application in Linux or Windows that it wouldn't run. >The older Cyrix chips that don't support all the needed instructions >for gpl probably aren't fast enough to run it anyway. I replaced my >Cyrix PR200+ 6x86MX processor with an AMD k6 233 for better floating >point performance and saw only a small increase in performance. >rob.
Skun 07 Oct 1998#425285
thats because AMD fpu blows as well the day i got the email back " gpl will require a Pentium " just after the demo came out.. out went the 6x86-L PR200.. in went a 233MMX and the difference was INCREDIBLE.. i though cyrix was decent.. not so Cyrix fpu totally STINKS, AMD is only slightly better :) at least the MX etc can run it >>They and half the rest of the world... Have you found good support for >>Cyrix chips from anyone?
>thats because AMD fpu blows as well >the day i got the email back " gpl will require a Pentium " just after the >demo came out.. >out went the 6x86-L PR200.. in went a 233MMX >and the difference was INCREDIBLE.. i though cyrix was decent.. not so Cyrix >fpu totally STINKS, AMD is only slightly better :) The FPU on AMD's K6 chips is okay. It's non-pipelined (meaning that only one FP instruction can run at a time), so it won't keep up with Intel's FPUs under heavy FP load, but it's far better than Cyrix's. If you look on Alison Hine's GPL page, you'll see that she got pretty good performance with a K6. A K6 is acceptable for 3D ***, even though it's not quite the match of a P2 except where 3DNow is well-supported. No current Cyrix processor should be placed within ten feet of a *** machine, though. -- spamgard(tm): To email me, put "geek" in your Subject line.
DB> I don't check this newsgroup on a daily basis so this may have been beat DB> to death. Is it really true that GPL won't work with a CYRIX DB> processor?? I can't believe they would do this. I can't confirm this (using AMD K6-II) but even if it runs - it sucks with a Cyrix, that's for sure. Also, man mailt sich... .\\atze [ FmMW2109 - FmMB2139 ] *home* : http://www.home4u.de/buesing/
S> and the difference was INCREDIBLE.. i though cyrix was decent.. not so S> Cyrix fpu totally STINKS, AMD is only slightly better :) Bullshit ! Cyrix sucks, that's for sure. But the AMD K6/K6-II kicks ass - the FPU is not as good as a iP but compared to what you get for the price the AMD is the only right choice, IMHO. I didn't experienced ANY difficulties with my AMD K6-II/300, neither with my old K6/200...in any game. Also, man mailt sich... .\\atze [ FmMW2109 - FmMB2139 ] *home* : http://www.home4u.de/buesing/
I can confirm, I have seen and tested GPL on a Cyrix....it runs but it sucks very hard.... sorry

Sponsors

Affiliate Links

Sim Gaming Expo MOZA Racing Sim-Lab Fanatec TrakRacer Asetek Internet Privacy From NordVPN Dreamhost Capital One Credit Card Application Fanatical CDKeys Amazon Amazon UK Project Motor Racing iRacing Get your racing gloves, boots and more from Demon Tweeks. Enlist at Roberts Space Industries, developers of Star Citizen and Squadron 42


Back from the ashes since July, 2019. First created in 2001 with the merger of Legends Central (founded 1999) and simracing.dk.

A site by a sort of sim racer, for sim racers, about racing sims. News and information on both modern and historic sim racing software titles.

All products and licenses property of their respective owners.


Facebook Threads Bluesky Twitter Mastodon Instagram YouTube Tiktok Twitch Reddit Google News Apple News Subscribe via WordPress Flipboard eBay

Race Sim Central © 1999-2026 | Some links pay RSC a commission. Advertising does not equal endorsement.Cookie Policy