Just upgraded entire home network to W98SE, and gained the easy
networking wizard known as "Internet Connection Sharing" ... works
great, all 3 PC's now share the DSL line, BUT ... I've lost the ability
to host and/or join multiplayer races on my LAN ... it's driving me
nuts!
Any ideas and/or commiserations?
Yr friend in the aether,
smogbike
Quoted text (7 lines)
> Just upgraded entire home network to W98SE, and gained the easy > networking wizard known as "Internet Connection Sharing" ... works > great, all 3 PC's now share the DSL line, BUT ... I've lost the ability > to host and/or join multiplayer races on my LAN ... it's driving me > nuts! > Any ideas and/or commiserations?Ok Arne, where do I run this program? on the host machine or
on the client? Thanks...
dave henrie
Quoted text (19 lines)
> > Just upgraded entire home network to W98SE, and gained the easy > > networking wizard known as "Internet Connection Sharing" ... works > > great, all 3 PC's now share the DSL line, BUT ... I've lost the ability > > to host and/or join multiplayer races on my LAN ... it's driving me > > nuts! > > Any ideas and/or commiserations? > This is because ICS basically sets up a firewall, closing all ports for > incoming connections. To open the ports again go to: > http://www.timhiggins.com/ppd/icsconfiguration.htm > and download the program to configure your ICS setup. For GPL you will > have to open a range of UDP ports for incoming connections: > 6968-6971 > 32000 > 32766-32786 > -- > Arne Martin> Ok Arne, where do I run this program? on the host machine or
> on the client? Thanks...
> dave henrie
You should run it on the machine which is connected to the internet, as
that's the one which has the firewall. I also think you will have to use
this machine as the host.
--
Arne Martin
% >
% > Ok Arne, where do I run this program? on the host machine or
% > on the client? Thanks...
% > dave henrie
% You should run it on the machine which is connected to the internet, as
% that's the one which has the firewall. I also think you will have to use
% this machine as the host.
With the ICSconfig program, you can specifiy which IP address (i.e.,
machine), will be the "host". You can only have one machine receiving
on the ports needed for GPL online racing. I have it set up so I can
disable one machine in ICSconfig and enable another. That way I can use
a dedicated host for league hosting and my main machine for general
hosting.
--
**************************** Michael E. Carver *************************
Upside out, or inside down...False alarm the only game in town.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=
Before you installed ICS, you were probably using static IP addresses (e.g.
192.168.0.1) for each of the machines on your LAN. But to use ICS, the
'clients' of the ICS server need to use dynamic IP addresses. GPL's default
method of finding IP addresses on a machine will only find static addresses
(and dialup networking IP addresses). Add the following two lines to your
core.ini file to tell GPL to use its alternate method of finding your
machine's IP addresses. That will more than likely solve your problem.
[ Communications ]
alternate_ip_addr_lookup = 1
Also, if you run a GPL server on your LAN, and connect to it from another
computer that is also on your LAN, you might want to consider adding the IPX
protocol to your LAN (standard disclaimers re: your network going haywire
trying to do this :-). A GPL server will send more information to clients
that are connected to it using the IPX protocol (on the assumption that it
will be a LAN connection, and not, possibly, a dialup connection).
Randy
