does it work,it wont see my brake peddle..i have spit axis
On my TSW2, set throttle to "split axis -" and brake to "split axis +"
On Wed, 16 Jul 2003 23:56:01 GMT, "CW Webster"
<[email hidden]> wrote:
>does it work,it wont see my brake peddle..i have spit axis
>
thx for the raply but that didnt help either,stilkl doesnt see my
brake..works on all other games or sims that support split axis
"T. Wortman" <[email hidden]> wrote in message
news:[email hidden]...
Quoted text (8 lines)
> On my TSW2, set throttle to "split axis -" and brake to "split axis +" > > On Wed, 16 Jul 2003 23:56:01 GMT, "CW Webster" > <[email hidden]> wrote: > > >does it work,it wont see my brake peddle..i have spit axis > > >Works fine with MS FF Wheel, sees split axis...
G Patricks
Quoted text (15 lines)
>On Thu, 17 Jul 2003 02:50:12 GMT, "CW Webster" <[email hidden]> wrote: >thx for the raply but that didnt help either,stilkl doesnt see my >brake..works on all other games or sims that support split axis >"T. Wortman" <[email hidden]> wrote in message >news:[email hidden]... >> On my TSW2, set throttle to "split axis -" and brake to "split axis +" >> >> On Wed, 16 Jul 2003 23:56:01 GMT, "CW Webster" >> <[email hidden]> wrote: >> >> >does it work,it wont see my brake peddle..i have spit axis >> > >> >"CW Webster" <[email hidden]> wrote in message news:<lClRa.14395$[email hidden]>...
> does it work,it wont see my brake peddle..i have spit axis
NetKar works fine for me -- I have a TSW2 with combined axis (I'm a
dedicated right-foot braker, so split axis doesn't help me a bit).
This might help you out, though -- I got this from the
http://www.nkzone.com site (plenty of good info there, plus skins,
tracks, and other netKar-related stuff). My guess is that you're not
doing something right during steps 6 - 9, or you're not doing step 15:
===============
1) start netKar
2) select settings->controller
3) select controller that you'd use
4) click on "steer" radio button
5) move your wheel and look what bar in right windows is moving, then
click "select" button under that
6) click on "throttle" radio button
7) push your throttle pedal and look what bar in right windows is
moving, then click "select" button under that
8) click on "brake" radio button
9) push your brake pedal throttle and look what bar in right windows
is moving, then click "select" button under that
10) click on "gear up" radio button
11) push on your gear up button on controller and look what button in
right windows is ligthing on, then click "select" near that
12) click on "gear down" radio button
13) push on your gear down button on controller and look what button
in right windows is ligthing on, then click "select" near that
14) enable or not Force feedback
15) check that pushing on your throttle pedal, the bar under the
trhottle label on move towards right, else change the voice "split
axis -" with the "split axis +" one, or the same with "combined +" or
"combined -"
16) do the same work with brake pedals
===============
Good luck!
-- JCB
ive read trhat..8) click on "brake" radio button ..and nothing moves
"jbodin" <[email hidden]> wrote in message
news:[email hidden]...
> "CW Webster" <[email hidden]> wrote in messagenews:<lClRa.14395$[email hidden]>...
